Honda Fit Forums  

Go Back   Honda Fit Forums > Fit Forums > DIYs

DIYs place all DIYs here

Thread Tools Display Modes
Old 08-01-2017, 09:03 AM
radioarno radioarno is offline
Junior Member
Join Date: Oct 2016
Posts: 17
radioarno is on a distinguished road

I did my valves last weekend, 08 MT LX. Never did anything like this before, taking apart an engine. It went super smoothly, thanks to the DIY on here, Buff Haynes from the other site, and Claymore. I had no problems. Didn't remove throttle body just left it hanging, didn't lose any coolant. Like others noticed the exhaust valves were all around .006 .007 , as were the intake valves. In other words, the intakes hardly move but the exhausts tighten up considerably. There were three intake valves which were perfect so I didn't adjust them at all. Replaced plugs and coils with hitachis. When removing the old coils one of them, #4, the boot detached and I had to put a needlenose plier down the hatch to pull out the boot. The spring stretched, and when I tried to retension the spring it broke, so I had to replace that coil, and decided to do all 4 since its 92000 miles and due. Torqued plugs to spec, used antiseize. I'll check the plugs again in a couple of weeks to make sure they're adequately torqued. Removing the airbox was much easier than anticipated. So, to anyone who is afraid of doing this kind of work, know from this newbie that's it's actually not difficult. You have to be methodical. Check your work. Don't rush. Take breaks. Have a friend to turn the crank. thanks everyone. No ticking after it was done. The engine was unusually quiet. Its actually fun.
Reply With Quote
Old 08-03-2017, 02:53 AM
claymore's Avatar
claymore claymore is offline
Join Date: Apr 2009
Location: Far side of the moon
Posts: 3,568
claymore is on a distinguished road

Well that is good news that you got it done with no problems. That is an accomplishment to be proud of for someone that never did it before.

Feels pretty good doesn't it.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 03:59 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.